- Adhesives & Sealants[10]
- Other Chemicals[3]
- Filter Papers[10]
- Oil Filter[1]
- Other Metal Processing Machinery[10]
- Paper Processing Machinery[2]
- Moulds[10]
- Steel Wire Mesh[10]
- Contact Person : Mr. Li Steven
- Company Name : Anping Sanlian Filtering Equipment Co., Ltd.
- Tel : 86-0318-7850508
- Fax : 86-0318-7524169
- Address : Hebei,Anping County Hengshui City,ZhengXuan Village Anping County
- Country/Region : China
- Zip : 053600
Related Product Searches:two component chemical glue,PU adhesive manufacturer,High Quality,Filter glue, polyurethane for air filter,SLAP140
SLAP140
Manual PU adhesive, good quality PU system for automotive air filters, to injection filter end cap, can also use the semi-automatic PU casting machine, low cost for general enterprise.
Technical parameters:
Item | Component A | Component B |
Appearance | cream viscous liquid(adjustable) | light brown liquid |
Density 20°C g/ml | 1.02±0.02 | 1.20±0.03 |
Viscosity 25°C mPa.S | 1800±200 | 150-300 |
Storage | 6 months at room temperature ≤25°C | |
Mixing ratio by weight | 100 | 40 |
Cream time | 15-20s | |
Demold time | 10±2min | |
Shore A hardness | 25±5(adjustable) | |
Color | Orange(adjustable) | |
Tensile strength | ≥0.8 MPa | |
Elongation at break | ≥90% |
Instructions:
1. Part-A should stir evenly with plastic hand electric drill; shake Part B, before used.
2. Open the electrocaloric plate temperature to 40-50 degrees, in winter Part-A and B with a small container to preheat.
3. Wipe the mould with release agent
4. Each 1kg A adds 3-6g water, also according to the local environment, such as the humidity in the air, workshop environment.
5. material-A and material-B are mixed at the mixture ratio of 100:40 ratio, then add 40% talcum powder(heavy calcium powder)(100:40:50±5), with 2800 rev / min motor to mix, mixing time determined by the amount of adhesive, per 100g of adhesive is approximately 7-10 seconds .
6. Pour the Mixed liquid into mould, then put the paper element and give a little pressure on it. 8-15 minutes later you can bring the mould down.
two component chemical glue,PU adhesive manufacturer