Anping Sanlian Filtering Equipment Co., Ltd.
Main products:polyurethane adhesive,filter,filter cap,filter paper,filter screen
Products
Contact Us
  • Contact Person : Mr. Li Steven
  • Company Name : Anping Sanlian Filtering Equipment Co., Ltd.
  • Tel : 86-0318-7850508
  • Fax : 86-0318-7524169
  • Address : Hebei,Anping County Hengshui City,ZhengXuan Village Anping County
  • Country/Region : China
  • Zip : 053600

two component chemical glue,PU adhesive manufacturer

two component chemical glue,PU adhesive manufacturer
Product Detailed
PU foam adhesive Used for injection air filter end cover Capacity:10Tons per day Delivery time: 10-15days after your deposit

SLAP140

Manual PU adhesive, good quality PU system for automotive air filters, to injection filter end cap, can also use the semi-automatic PU casting machine, low cost for general enterprise.

Technical parameters:

Item

Component A

Component B

Appearance

cream viscous liquid(adjustable)

light brown liquid

Density 20°C g/ml

1.02±0.02

1.20±0.03

Viscosity 25°C mPa.S

1800±200

150-300

Storage

6 months at room temperature ≤25°C

Mixing ratio by weight

100

40

Cream time

15-20s

Demold time

10±2min

Shore A hardness

25±5(adjustable)

Color

Orange(adjustable)

Tensile strength

≥0.8 MPa

Elongation at break

≥90%

Instructions:

1. Part-A should stir evenly with plastic hand electric drill; shake Part B, before used.

2. Open the electrocaloric plate temperature to 40-50 degrees, in winter Part-A and B with a small container to preheat.

3. Wipe the mould with release agent

4. Each 1kg A adds 3-6g water, also according to the local environment, such as the humidity in the air, workshop environment.

5. material-A and material-B are mixed at the mixture ratio of 100:40 ratio, then add 40% talcum powder(heavy calcium powder)(100:40:50±5), with 2800 rev / min motor to mix, mixing time determined by the amount of adhesive, per 100g of adhesive is approximately 7-10 seconds .

6. Pour the Mixed liquid into mould, then put the paper element and give a little pressure on it. 8-15 minutes later you can bring the mould down.

two component chemical glue,PU adhesive manufacturer



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.